15% off one item

20% off two

25% off three or more

rolex submariner in che posizione deve essere la corona avvitata | Il tuo Rolex nel quotidiano

$289.00

In stock

The Rolex Submariner, a name synonymous with precision, durability, and timeless elegance, is more than just a watch; it's a statement. Whether you own an Oyster Perpetual Submariner, a Submariner Date, or even a variation incorporating GMT functions, understanding the intricacies of its operation is crucial for maintaining its longevity and ensuring its legendary performance. One of the most critical aspects of Submariner ownership is the correct operation and positioning of the winding crown. In this comprehensive guide, we'll delve deep into the proper procedure for screwing down the crown to maintain waterproof integrity, touching upon various models within the Rolex Submariner family and exploring the nuances of daily wear and care.

The Importance of the Screw-Down Crown: A Key to Submariner's Waterproofing

The Rolex Submariner, as a dive watch, is built to withstand the rigors of underwater exploration. Its legendary water resistance is not achieved by chance but through meticulous engineering and precise construction. The screw-down crown is a fundamental component of this waterproofing system. It acts as a barrier, preventing water and dust from entering the watch case and damaging the delicate movement within. The crown seals against the case using a series of gaskets and O-rings, creating a watertight seal. However, this seal is only effective when the crown is properly screwed down.

Leaving the crown unscrewed, even slightly, compromises this seal and leaves the watch vulnerable to moisture ingress, potentially leading to corrosion, malfunction, and costly repairs. Therefore, understanding the correct procedure for screwing down the crown is paramount for any Submariner owner.

Understanding Crown Positions on Your Rolex Submariner

Before we discuss the proper screwing-down technique, it's essential to understand the different crown positions on your Rolex Submariner. Typically, the crown has three distinct positions, often referred to as Position 0, Position 1, and Position 2.

* Position 0 (Screwed Down): This is the default position when the watch is being worn or stored. The crown is fully screwed down against the case, ensuring maximum water resistance. In this position, the crown cannot be turned, and the watch is sealed. This is the position you want the crown in after setting the time or winding the watch.

* Position 1 (Unscrewed, Winding Position): To access this position, you must first gently unscrew the crown counter-clockwise. Once unscrewed, the crown will pop out slightly. In this position, you can manually wind the watch. This is particularly important for Oyster Perpetual models that rely on the wearer's movement to power the automatic movement. If the watch has been idle for a period, a few turns of the crown in this position will provide the initial power reserve needed for the watch to function. Remember to avoid over-winding, which can damage the mainspring. As a general guideline, wind until you feel slight resistance.

* Position 2 (Time Setting Position - and Date Setting on Submariner Date): After pulling the crown further out from Position 1, you will reach Position 2. In this position, you can set the time. On Submariner Date models, there might be an intermediate position between Position 1 and Position 2 to allow for quick date adjustment. This intermediate position usually allows you to advance the date by turning the crown. When setting the time, ensure that the hands are moving smoothly and accurately.

The Correct Procedure for Screwing Down the Crown: A Step-by-Step Guide

Now that we understand the different crown positions, let's focus on the correct procedure for screwing down the crown after setting the time or winding the watch. This is where the phrase "riavvitare con cura la corona contro la cassa per garantirne l’impermeabilità" (carefully screw the crown against the case to ensure waterproofing) comes into play.

1. Ensure the Crown is in Position 1 (Winding Position): After setting the time or date, gently push the crown back into the case until it reaches Position 1.rolex submariner in che posizione deve essere la corona avvitata

2. Apply Gentle Pressure: While pushing the crown gently inward towards the case, begin to turn it clockwise. You should feel the threads engage.

3. Screw Down the Crown: Continue turning the crown clockwise until it is fully screwed down against the case. You should feel a definite stop when the crown is fully tightened. Avoid overtightening, as this can damage the threads or the gaskets.

4. Final Check: Once the crown is screwed down, give it a very slight wiggle to ensure it is secure. If it feels loose, repeat the process, ensuring that you apply gentle pressure while turning the crown.

Key Considerations and Common Mistakes to Avoid

* Never Force the Crown: If the crown is difficult to screw down, do not force it. This could indicate a problem with the threads or the gaskets. Take the watch to an authorized Rolex service center for inspection and repair.

Additional information

Dimensions 8.7 × 1.1 × 3.8 in

Unique ID: https://9husini.com/global/rolex-submariner-in-che-posizione-deve-essere-la-corona-avvitata-8553.html